Other Devices

Onboarding Other Devices

  1. Go to (Menu) > CERT+ > ADMINISTRATION > Device Management.
    By default, the ADC tab opens.
  2. Click the Server tab.
  3. Click the (Add) icon.
  4. Select Other Devices logo from the Vendors list.
  5. In the Server Details section, enter details as mentioned below.
    Table 1. Server Details - Field Description Table
    Fields Description
    *Server Type The server type has a fixed value Other devices.
    *Server name Enter a unique name of the designated server to be onboarded.
    *IP address/ FQDN Enter the valid IP address of the device to be onboarded.
    Data center Choose the desired data center.
    Onboarding Group Select the onboarding group to assign the device.
    Note: Devices without an assigned group are automatically mapped to the Default group during migration, onboarding, and when edited without existing group mappings.
    *SSH Port Retain the value 22; it is the default port used for the SSH communication mode.
    Cert sync Choose from any of the following:
    • Managed - AppViewX performs the config fetch operations and the certificates are discovered and managed in the inventory. CLM actions (push & bind, rollback etc.) can be performed on them.
    • Monitored - AppViewX performs the config fetch operations and the certificates are downloaded in the inventory in the read-only state. CLM actions cannot be performed on them.
    • Ignored - AppViewX only performs the config fetch operations for the devices. There is no certificate discovery performed.
    *: Mandatory fields
  6. In the Credentials section, select/enter the details as follows.
    Table 2. Credentials - Field Description Table
    Fields Description
    *Credential Type Select the credential type from the dropdown.
    • Manual entry (default)
    • Credential List - Appviewx
    Note: If Credential list - Appviewx is selected, the *Credentials list dropdown field is displayed. Select any of the preconfigured credential values.
    *Username Enter the designated username for authentication.. (field displayed for manual entry only)
    *Password Enter the secure password. (field displayed for manual entry only)
    *: Mandatory fields
  7. Click Save.
    The device is onboarded successfully.

Validating the Device

After the device is onboarded successfully, follow the steps to validate the device communication with AppViewX:
  1. Go to ADMINISTRATION > Device Management.
    By default, the ADC tab opens.
  2. Click the Server tab.
    The Server Inventory page is displayed.
  3. Check that the device name appears in the inventory (Name column) with the specified status in the status column.
    The status column will have the value Managed/Monitored/Ignored if the connection is successful or displays Failed/Unresolved in case of failure.
  4. From the Status column, click the Managed/Monitored/Ignored/Failed/Unresolved.
    Device Status Log pop-up is displayed.
  5. Expand each value in the pop-up to know the Device communication, Device Version, Instance Information, and Certificate Discovery From Device.

What's Next

Once you have onboarded and validated the device connection, you are ready to proceed with the any of the following certificate actions: