Adding Array Device

To add an Array device:

  1. Go to (Menu) > CERT+ > ADMINISTRATION > Device Management.
    By default, the ADC tab is displayed.
  2. Click the (Add) icon.
  3. In the Device details page, select Array from the left sidebar.
  4. Enter the field information in the General information section.
    Table 1. General information Section - Field and Description Table
    Name Description
    *Modules Select modules checkbox. The values are
    • SLB
    • GSLB
    *Device name Unique name of the device to be added.
    Note: Device names can only contain alphanumeric characters, '-' , '_' , '.' , '*' , '|' , '!' and spaces.
    Data center Enter the Datacenter name where the device is configured. The default value is Absecon.
    Note: Data center name can only contain alphanumeric characters, '-' , '_' , '.' , '*' , ':' , '|' and spaces.
    Onboarding Group Dropdown Select the onboarding group to assign the device.
    Note: Devices without an assigned group are automatically mapped to the Default group during migration, onboarding, and when edited without existing group mappings.
    		 NA
    Communication Select the communication method for accessing devices, either through an IP address or FQDN.
    *IP Address Enter the IPv4 address of the device.
    Note: The IP address must be in the correct format.
    *API Port Enter the communication port of the device.
    Note: Only the numbers are allowed.
    Cert Sync Select the certificate sync option:
    • Managed: The certificates of the device can be managed.
    • Monitored: The certificates of the device can be monitored.
    • Ignored: The certificate sync can be ignored.
    LB Sync By default, this option is enabled to discover and manage the load balancer configurations. If not required, you can disable this option.
    *: Mandatory fields
  5. Enter the field information in the Credentials section. You can select Manual Entry or Credentials List.
    Table 2. Credentials Section - Field and Description Table
    Name Description
    *Credential type Manual entry: The user should enter the username and password.

    Credential List: The user can select the credential details which are already stored in the credential inventory page.
    *Username Enter the user name of the device.
    *Password Enter the password of the device.
    *: Mandatory fields
  6. Enter the field information in the Secondary device information section.
    Table 3. Secondary device information Section - Field and Description Table
    Name Description
    *Secondary / Failover / Sync group

    Auto detect: The user should select this option to auto-detect and add the peer devices in the inventory page.

    Manual entry: The user can use this option to add the peer devices manually.

    Ignore: The user can use this option to ignore the auto-detection of the peer devices.
    *: Mandatory fields
  7. Click Save.