Bug Fixes

This section describes the bug fixes in this release.

Automation

  • Raise Exception Truncates String Values Containing Forward Slash

    Resolved an issue where raising an exception with string arguments containing a forward slash (/) resulted in truncated values. For example, 12.34.56.67/24 was displayed as 24 and https://abc.com/ was displayed as https:abc.com/. Exception arguments are now preserved in full. Additionally, resolved a related issue where validating scripts in Input/Output containing Integration or Credential Store variables threw an "Error while previewing the task" error.

  • Workflow Retry Palette Fails Despite Successful Device Operation

    Resolved an issue where workflows failed at the retry stage even though the underlying device operation had completed successfully. This affected workflows such as Configuration Fetch and R-Series Backup. Workflow status is now updated correctly, preventing false failure outcomes.

ADC

  • F5 Device Certificate Discovery Returns Incomplete Results

    Resolved an issue where on-demand and scheduled certificate discovery for F5 HA pair devices returned fewer certificates than expected. The issue was caused by a NullPointerException during recursive SSH-based certificate file retrieval and by request throttling under high load. Discovery now retrieves the complete certificate inventory from F5 devices.

  • NetScaler Default Partition Connector Created Automatically Consuming License

    Resolved an issue where onboarding a NetScaler device automatically created a default connector for the device partition, consuming an unnecessary license and displaying a red connector status. Deleting the connector caused it to reappear on subsequent onboarding. Default partition connectors are no longer created automatically during NetScaler device onboarding.

  • NetScaler Certificate Discovery Returns Zero Certificates Intermittently

    Resolved an intermittent issue where NetScaler certificate discovery returned zero certificates despite the device having a full inventory. The issue was caused by an error during virtual server certificate association retrieval. Discovery now consistently returns the complete certificate count from NetScaler devices.

  • CloudFlare Device Stuck in In-Progress State After Config Fetch

    Resolved an issue where the CloudFlare device failed to reach a managed or failed state after a configuration fetch, remaining permanently stuck In Progress. The root cause was a ClassCastException in the Nashorn JavaScript transformer, combined with an error callback that did not update device status. Config fetch now completes with the correct terminal state.

  • Traffic Grid Widget Displays Incorrect Connection Counts for F5 Virtual Servers

    Resolved an issue where the Traffic Grid dashboard widget showed incorrect connection values for F5 virtual servers after upgrading to AppViewX v2026.1.0. Connection statistics are now displayed correctly in the Traffic Grid widget.

  • Device Backup Group Does Not Allow Adding Devices to Existing Groups

    Resolved an issue where adding newly onboarded devices to an existing device backup group failed with a "Mandatory Field 'category' is missing or empty" validation error. Devices can now be appended to existing backup groups without validation errors.

  • Dashboard Widget Regex Incorrectly Associates VIP from Config Fetch to Wrong Widget

    Resolved an issue where a newly discovered VIP object was automatically added to an incorrect dashboard widget due to a regex pattern match during post-discovery evaluation. Additionally, the regex configuration was not visible in the UI for review or modification. Regex visibility has been restored in the widget configuration to allow administrators to refine match criteria.

  • Fetch F5 Master Key Workflow - Backups Dropdown Not Populated

    Resolved an issue where the Fetch F5 Master Key workflow displayed the device selection form but did not populate the Backups dropdown. Proceeding without a selection caused a Python timestamp parsing error (ValueError: time data '' does not match format). The Backups dropdown now populates correctly and the workflow completes successfully.

  • F5 Certificate Bind Fails with Unable to Find Valid Certification Path

    Resolved an issue where certificate bind to an F5 device failed with a PKIX path building error despite the certificate being successfully pushed. The certificate chain is now correctly resolved during F5 bind operations.

  • Certificate Push to F5 Fails on First Attempt but Succeeds on Retry

    Resolved an issue where certificate push to F5 HA pair devices consistently failed on the first attempt but succeeded on manual retry. Certificate push now completes successfully on the first attempt without requiring a manual retry.

CLM

  • Secure Credential Persistence for Password-Protected Certificates

    AppViewX securely persists credentials in the AppConnector for password-protected certificates discovered using passwords from the Password Vault or managed through the Password-Protected Certificate Discovery Results page. This enables subsequent auto-renewal and auto-push operations without requiring manual password entry.

  • Certificate Path Validation in Push Connector Workflows and APIs

    AppViewX now validates certificate path fields across Push Connector Create/Update and API flows, enforcing a maximum length of 4096 characters and rejecting unsupported characters, invalid path formats.

  • Automated Lifecycle Support for Password-Protected Certificates

    AppViewX now securely persists credentials in the AppConnector for password-protected certificates discovered using passwords from the Password Vault or managed through the Password-Protected Certificate Discovery Results page. This enables subsequent auto-renewal and auto-push operations without requiring manual password entry.

  • Enhanced Certificate Path Validation

    AppViewX now validates certificate path fields across Connector Create/Update and API flows, enforcing a maximum length of 4096 characters and rejecting unsupported characters, invalid path formats, and relative path traversal patterns.

  • Azure Key Vault - Allow Private Key Export Option Unavailable

    Resolved an issue where the Allow Private Key Export option was greyed out for certificates stored in Azure Key Vault, preventing certificates from being bound to Azure resources. The option is now configurable as expected.

  • Azure App Service Certificate Push Fails with Invalid Key Vault ID

    Resolved an issue where pushing a certificate to an Azure App Service failed with a properties.keyVaultId invalid value error. The Key Vault ID is now correctly formatted as a fully qualified Azure resource path.

  • Azure VM Inventory Sync Returns Incomplete Results

    Resolved an issue where Azure VM inventory sync discovered only a subset of Virtual Machines from the target subscription despite correct IAM permissions. Asset inventory sync now returns the complete VM inventory across all targeted Azure subscriptions.

  • Connector Status Updated for Azure Key Vault Cloud Scan Discovery

    The Cloud Scan Discovery connector status for Azure Key Vault is now updated when a scheduled discovery is triggered, providing accurate real-time status visibility without requiring certificate sync to be set to Managed or Monitored.

  • AES Encryption Support for Private Key in Azure Key Vault Secret Push

    AppViewX now uses AES encryption instead of the deprecated Triple DES (3DES) algorithm when encrypting private key material during certificate push operations to Azure Key Vault, improving cryptographic strength and aligning with current security standards.

  • Certificate Push to MSSQL via API Returns CANNOT_PERFORM_OPERATION

    Resolved an issue where the POST /avxapi/certificate/profiles/push API returned HTTP 500 with CANNOT_PERFORM_OPERATION for MSSQL certificate profiles despite the certificate being in Managed status. The connector push validation logic now correctly evaluates certificate push eligibility when called via API.

  • Push Task Uses Stale CyberArk Credentials After SSH Credential Update

    Resolved an issue where changing a managed Linux device's credential type from CyberArk to SSH did not take effect for subsequent Push Task workflows. Credential type changes are now applied immediately without requiring device deletion and re-onboarding.

  • Windows Tomcat Certificate Discovery Failure

    Resolved an issue where Windows Tomcat certificate discovery failed to match certificate file names and folder paths when their letter casing differed from the configured paths. The discovery process now performs case-insensitive comparisons for Windows paths without affecting other vendors or API flows.

  • Citrix NITRO Session Handling

    Resolved an issue by logging out of NITRO before downloading data through REST and re-authenticating before certificate parsing and association. This ensures certificate association uses a fresh NITRO session.

  • Citrix Certificate Profile Construction

    Resolved an issue where Citrix certificate profiles did not correctly identify the certificate type. The system now determines the certificate type from the certificate filename extension and stores the resolved value in the profile's vendor properties.

  • MSSQL Discovery Fails with NullPointerException When Password Vault Entry Has Empty Password

    Resolved an issue where MSSQL certificate discovery failed when the Password Vault contained an entry with an empty password. A NullPointerException in PasswordVaultIterator caused a subsequent ClassCastException, resulting in AVX_RAPID-CONN-CERT-0008. Empty password entries are now handled gracefully without terminating discovery.

  • WebLogic Linux Certificate Discovery Fails with UnrecognizedPropertyException on Custom Directory Scan

    Resolved an issue where WebLogic Linux certificate discovery with a custom directory path failed due to an UnrecognizedPropertyException caused by an unsupported certificateLocation field. Discovery now completes successfully with a custom directory, and the error message accurately reflects the actual failure.

  • Apache Windows Service Restart Fails Post Push and Bind with Endpoint CSR Generation

    Resolved an issue where Apache on Windows failed to restart after push and bind when endpoint CSR generation used the Use Existing Configuration option. Service restart now completes successfully.

  • AIX Linux Endpoint CSR Generation and Push Failing

    Resolved an issue where endpoint CSR generation and certificate push to AIX Linux servers failed. Operations now complete successfully.

  • Tomcat Linux Endpoint CSR Generation Failing

    Resolved an issue where endpoint CSR generation at Tomcat Linux servers failed with "Problem while generating CSR on target server." CSR generation now completes successfully.

  • Panorama Commit Failure Reports Incorrect Error Message

    Resolved a misleading error where a Panorama-phase commit failure incorrectly reported that the firewall commit had failed. Error messages now accurately distinguish between Panorama and firewall commit failures.

  • Root CA Certificates Unavailable in EST Issuer Certificate Configuration on SaaS

    Resolved an issue where Root CA certificates were not available in the EST Issuer Certificate configuration in SaaS environments. Root CA certificates are now listed correctly, consistent with on-premises behavior.

  • Bulk Device Import Fails When Non-Default Onboarding Group Is Specified

    Resolved an issue where Bulk Device Import failed during asynchronous processing when a non-default Onboarding Group was specified. The import initially showed success but subsequently changed to Failed after page refresh. Onboarding Group validation now resolves the specified group correctly.

  • Palo Alto Invalid Credentials Do Not Display Correct Status Error

    Resolved an issue where configuring a Palo Alto firewall with invalid credentials did not display a meaningful error. The device status message now accurately reflects credential validation failures.

  • Device Export Not Working as Expected

    Resolved an issue where the Device Export option did not function as expected. Device data can now be exported successfully.

  • CSR Submission Fails for Domino ACME Client with Missing Mandatory Fields

    Resolved an issue where Domino ACME enrollment failed with missing mandatory field errors for adminEmail, contactEmail, and endtime required by the OpenTrust CA profile. Profile parameters are now correctly passed during ACME enrollment.

  • ACME Wildcard Enrollment Fails Due to Infoblox Reverse Mapping Zone Retrieval

    Resolved an issue where ACME wildcard enrollment with automated DNS via Infoblox failed in environments with large numbers of subnet objects. The zone retrieval now filters out reverse mapping zones, ensuring consistent DNS TXT record creation during ACME enrollment.

  • DCV Validation Failing Due to Trailing Dot in CNAME Record for Infoblox

    Resolved an issue where DCV failed when creating a CNAME record in Infoblox because the record name was submitted with a trailing dot, which Infoblox WAPI rejects as an invalid domain name. The trailing dot is now stripped before submission, and DCV completes successfully.

  • Missing Input Validation for Certificate File Path Fields in Connector APIs

    Resolved a security issue where intermediateLocation and rootLocation in the connector create and update APIs lacked server-side validation. These fields now enforce a 255-character maximum, accept only valid certificate file path formats, and reject shell metacharacters. Invalid requests are rejected with HTTP 400 Bad Request.

  • Group-Level Auto-Push Not Working After Certificate Auto-Renewal

    Resolved an issue where automatic certificate push configured at the group level did not execute after certificates were auto-renewed. Additionally, resolved a related issue where renewed certificates appeared as duplicates in the inventory without log traces. Group-level push now triggers correctly following auto-renewal, and duplicate entries are no longer created.

  • Incorrect Private Key Retrieved via Certificate Download API

    Resolved an issue where the certificate and key download API returned the root CA's private key instead of the intended certificate's private key. The API now returns the correct private key for the requested certificate.

  • Auto-Renewal Does Not Generate New CSR for Sectigo Certificates

    Resolved an issue where an AppViewX-generated CSR was not correctly used during auto-renewal for Sectigo certificates. Auto-renewal now generates a new CSR and submits the renewal request correctly while preserving certificate order history.

  • DigiCert Duplicate Certificate Creation Fails with Certificate Type Eligibility Error

    Resolved an issue where duplicating a DigiCert certificate failed with "This Selected certificate cannot be duplicated as the specified certificate type is not eligible for duplication." Certificate duplication now completes successfully for eligible DigiCert certificate types.

  • GoDaddy Certificate Enrollment Fails with "Period Must Be at Least 30 Days"

    Resolved an issue where GoDaddy CA enrollment failed when a validity period of 199 days was specified because the validity period was being passed as 0 in the API payload. The validity period is now correctly calculated and included in the enrollment request.

  • Private Key Download with AES Encryption Fails with Empty Error Popup

    Resolved an issue where downloading a private key with the AES encryption option displayed an empty red error popup and did not download the key. The download now completes successfully, and any errors are displayed with descriptive messages.

  • Windows Server Certificate Push Includes Root and Intermediate Certificates Unexpectedly

    Resolved an issue where pushing a certificate to a Windows server always included root and intermediate certificates even when the Push Root and Intermediate option was not selected. Root and intermediate certificates are now only included when the option is explicitly enabled.

  • Auto-Regeneration Does Not Honor Approval Required Toggle in Certificate Group

    During auto-renewal and auto-regeneration, the approval behavior was inconsistently following CA policy settings instead of the Certificate Group configuration, leading to incorrect approval routing for scheduled actions. This issue has been fixed and the approval process for auto-renewal and auto-regeneration now consistently follows the Certificate Group level configuration, taking precedence over CA policy approval settings. Additionally, existing policy level approval data has been migrated to the respective Certificate Groups.

  • Adding Windows Gateway from General Settings Has No Effect

    Resolved an issue where clicking Add in Cert → Administration → General Settings to add a Windows Gateway had no visible effect. Windows Gateways can now be added successfully from General Settings.

  • Certificate Group Query Fails When Group Name Contains Reserved Keyword "and"

    Resolved an issue where users were unable to view certificates for groups whose names contained the reserved keyword "and." Database queries using the group name were not properly escaped, causing errors. Group names containing reserved keywords are now handled correctly.

  • Comments Field Not Preserved During Certificate Renewal

    Resolved an issue where the Comments field value was not carried over to the renewed certificate record. Administrative metadata stored in the Comments field, such as owner details, project codes, and change request IDs, is now preserved during renewal.

  • Certificate Expiry Alert List Truncated When More Than 15 Entries Exist

    Resolved an issue where the Certificate Expiry Alerts page displayed only 9 of 19 configured entries, and navigating to the next page showed duplicate entries. All expiry alert configurations are now displayed correctly regardless of the number of entries.

  • Sectigo Certificate Enrollment - Common Name Not Auto-Populating SAN Field

    Resolved an issue where the SAN field was not being auto-populated with the Common Name during Sectigo certificate enrollment after upgrading to v26.2.0.1. The Common Name is now correctly auto-populated in the SAN field during Sectigo enrollment.

  • Certificate Renewal Fails with Invalid Street Address for Organization Address with Special Characters

    Resolved an issue where certificate renewal failed because the existing organization address contained special characters (such as &) that were accepted during original issuance but now fail updated validation. The renewal process now handles pre-existing addresses with such characters without blocking renewal.

  • Multiple Sectigo CA Logos Appear in CA Policy

    Resolved an issue where editing a CA policy displayed two Sectigo CA profiles simultaneously, and selecting one also selected the other. CA policies now correctly list each integrated CA once.

  • Cannot Add DNS SAN During Regeneration When Certificate Has No Existing DNS SAN

    Resolved an issue where the DNS SAN field was unavailable during the regenerate operation for certificates that had no existing DNS SAN values. DNS SAN entries can now be added during regeneration regardless of whether the certificate currently has DNS SANs.

  • Certificate Group Inventory Page Does Not Load Completely

    Resolved an issue where the Certificate Groups page did not load completely and navigation and refresh controls were not visible. The groups inventory now loads correctly, and search and navigation function as expected.

  • Sectigo CA Discovery Does Not Retrieve All Certificates

    Resolved an issue where Sectigo CA scan discovery returned fewer certificates than expected despite a successful status. Certificates issued through renewals were not being retrieved. CA discovery now returns the complete certificate inventory from Sectigo.

  • Unable to Update CA Connector Information Due to Mandatory Field Validation Error

    Resolved an issue where updating CA connector information failed with "Invalid/Incorrect payload" (avx-common-028) due to a payload inconsistency between the isAutoRenewal and auto_renewal fields. The CA connector save API now correctly handles these field values.

  • Certificate Discovery Shows Success in Batch Summary but Failed in Main View

    Resolved an issue where a certificate discovery run was reported as successful in the batch summary but displayed as Failed in the main discovery status view. Discovery status is now consistent across all views.

  • Expired Certificates Not Moving from Managed to Monitored Status

    Resolved an issue where certificates past their expiry date were not automatically transitioned from Managed to Monitored status by the scheduled status update job. The job now correctly transitions expired certificates to Monitored status.

  • Automatic Certificate Regeneration Not Working for Azure Key Vault Certificates

    Resolved an issue where automatic certificate regeneration failed for Azure Key Vault certificates with a 4096-bit key and SHA256 hash. CA policy settings are now correctly applied during auto-regeneration, and the regeneration toggle can be modified without errors.

  • New Certificate Workflow Stuck in Certificate Retrieval Step

    Resolved an issue where newly enrolled certificates appeared stuck in the Certificate Retrieval state in the workflow, even though the actual submit, fetch, and persist operations completed successfully. The certificate is now visible in the inventory and the request state is updated correctly.

  • CSR Submission Fails to GlobalSign with Profile and Domain Not Found

    Resolved an issue where GlobalSign MSSL certificate enrollment failed with "Profile with name [name] and domain [domain] given in Common Name not found in CA Setting." The domain and CA profile mapping is now correctly resolved during CSR submission.

  • Policy Engine Generates Duplicate Update Requests for a Single Certificate

    Resolved an issue where the Policy Engine created multiple duplicate requests for a single certificate update. Duplicate requests accumulated even after the certificate was successfully updated. Policy Engine now generates a single request per certificate update and provides sufficient certificate context to correlate requests accurately.

  • Automatic Re-Enrollment Not Triggering for Certificates with Mid-Day Valid-From Time

    Resolved an issue where certificate auto re-enrollment did not trigger for certificates whose Valid From time occurred during the day rather than at midnight. The re-enrollment eligibility check now correctly handles certificates with non-midnight Valid From timestamps.

  • Certificate Expiry Alert Discovery Source Filter Not Retained After Saving

    Resolved an issue where the Discovery Source filter configured in Certificate Expiry Alerts was removed after saving. The filter was cleared from both the UI and the database, causing expiry notifications to ignore the selected source. Discovery Source filter settings are now persisted correctly.

  • Google CAS Certificate Does Not Preserve Email SAN from CSR

    Resolved an issue where the email address specified in a CSR subject was not included in the certificate issued by Google Cloud Certificate Authority Service. The email subject attribute is now correctly preserved in certificates issued through Google CAS.

  • Certificate Generation Fails for UPN SAN Containing Dollar Sign ($)

    Resolved a regression where generating or renewing a certificate with a UPN Other Name SAN value containing a dollar sign ($) failed with a UI validation error before the request was submitted. This regression was introduced when upgrading from 2025.0.0 to 2026.2.0. UPN SAN values with valid special characters are now accepted correctly.

  • Certificate Attribute Update Blocked by Special Character ">" in Field Value

    Resolved an issue where updating a certificate attribute such as Line of Business Name failed when the value contained the ">" character, which was blocked by security validation. Certificate attribute updates containing ">" are now handled correctly.

  • Push and Bind to MSSQL Server Failing

    Resolved an issue where certificate push and bind to MSSQL Server failed with a "BIND Failed" error. Additionally, the service was unexpectedly restarting during push even when the Service Restart option was not selected. MSSQL push and bind now completes successfully without unintended service restarts.

  • Certificates Not Discovered from Default Windows Certificate Store

    Resolved an issue where certificates stored in the Windows certificate store were not discovered correctly or were discovered without associated private keys. Application connectors were not auto-associating certificates after upload, config fetch, or manual discovery. Discovery and key association now function correctly for Microsoft CA-issued certificates in the Windows certificate store.

  • Post-Push Script Fails for SQL Reporting Services Certificate Binding

    Resolved an issue where a custom PowerShell post-push script configured to bind certificates to SQL Reporting Services failed during execution. The script now executes correctly as part of the certificate push workflow.

  • Custom Attributes Not Populated from CSC Global Portal CA Discovery

    Resolved an issue where custom attributes returned through the CSC Global Portal API were not appended to certificates in AppViewX after CA discovery. Custom attributes are now mapped and stored correctly following discovery.

  • GlobalSign Atlas CA Discovery Fetches Only a Subset of Certificates

    Resolved an issue where GlobalSign Atlas CA discovery returned a maximum of 35 certificates regardless of the date range specified. The CA discovery pagination logic has been corrected to retrieve all certificates within the specified date range.

  • Revoking Multiple Certificates with Same CN Fails with "Already Revoked"

    Resolved an issue where revoking the second of two certificates with the same Common Name (CN) but different serial numbers issued by Futurex CA failed with "Certificate is already revoked." Revocation now correctly identifies certificates by serial number, allowing each to be independently revoked.

  • Client Certificate Download Requires Read-Write Instead of Read-Only Permission

    Resolved an inconsistency where downloading client certificates required read-write (RW) permission while other certificate types could be downloaded with read-only (RO) access. Client certificate download now works with read-only permissions, consistent with server and code signing certificate types.

  • DCV Cloudflare DNS Record Insertion Fails on Domain Revalidation

    Resolved an issue where DCV management DNS record insertion via Cloudflare failed during domain revalidation despite the integration and account validation showing a success status. DNS record insertion now completes correctly during revalidation workflows.

  • IBM WebSphere Device Communication Failure on Windows

    Resolved an issue where AppViewX failed to communicate with IBM WebSphere servers on Windows. Device communication now completes successfully.

  • SwissSign CA DCV Validation Date Not Updating After Revalidation

    Resolved an issue where the DCV validation date for SwissSign CA continued to display the previous date after a successful revalidation. The validation date is now updated correctly following successful DCV revalidation.

  • Certificate Discovery Export Fails with Unable to Download for Large Result Sets

    Resolved an issue where exporting a large set of discovered certificates (~20,000 records) from managed server discovery failed with an "Unable to download" error after a timeout. Certificate discovery export now handles large result sets without timing out.

  • DCV Management - Expired Domain Status Shows Empty Popup

    Resolved an issue where clicking on an expired domain validation status in the DCV Management inventory opened an empty popup with no information. DCV status details for expired domains are now displayed correctly.

  • Cisco ISE CA Certificate Push Fails When Existing Certificate Has Same Subject

    Resolved an issue where pushing a CA certificate to Cisco ISE failed when an existing trusted certificate in the store had the same Subject but a different Serial Number, causing Cisco ISE to abort the import. The push operation now detects and handles this condition, allowing CA certificates to be imported successfully into Cisco ISE's Trusted Certificates store.

KUBE

  • Sectigo CA Certificate Requests with ECC Key Fail in Kubernetes Policy Central

    Resolved an issue where Sectigo CA certificate requests submitted through Kubernetes Policy Central failed when an ECC key type was specified. Enrollment requests using ECC keys from Policy Central now complete successfully.

  • Kubernetes Cluster Offboarding Policy Does Not Delete Clusters and Associated Groups

    Resolved an issue where the Kubernetes offboarding policy did not function as expected when deleting clusters. Deletions remained stuck in "delete in progress" and associated group counts were not reduced. The offboarding policy now cleanly removes clusters and associated group data.

  • KUBE License Usage Not Reflected in License Page

    Resolved an issue where KUBE license usage was not updated in Platform → License despite clusters being actively managed. The KUBE license count now accurately reflects the number of onboarded Kubernetes clusters.

Platform - Cloud connector

  • Cloud Connector Installation Stuck During Upgrade

    Resolved an issue where Cloud Connector installation remained in progress for more than 30 minutes during an upgrade. The upgrade process now completes within the expected timeframe.

  • CPU Utilization Spike in Cloud Connector at Recurring Intervals

    Resolved an issue where CPU utilization in the Cloud Connector spiked above the 80% threshold at recurring intervals, triggering Azure monitoring alerts. CPU utilization now remains within expected thresholds during normal operations.

Platform - Integration Hub

  • Kubernetes Configuration Security Hardening

    Resolved multiple Kubernetes configuration security findings from penetration testing. Addressed excessive RBAC permissions, weak container security configurations allowing privilege escalation, overly broad network access controls, and unsafe use of hostPath volumes with root privileges. Kubernetes deployment configurations now align with least-privilege and defense-in-depth security principles.

  • Super Admin Login Notifications Triggered by Tenant Management Activities

    Resolved an issue where super admin login notifications were sent to customers when tenant management activities such as enabling mTLS were performed. Login notifications are no longer triggered for tenant management operations. Additionally, resolved a related issue where the provisioning cluster IP was inadvertently displayed to customers.

  • HashiCorp Vault Integration Fails After Patch Upgrade

    Resolved an issue where HashiCorp Vault integration stopped functioning after a patch upgrade, returning an internal server error. Vault connectivity using AppRole authentication now works correctly after upgrades without requiring manual reconfiguration.

  • Delinea Credential Test Connection Fails When Credential Name Contains Spaces

    Resolved an issue where Test Connection for Delinea credentials failed when the credential name contained spaces. Credential names with spaces are now accepted and validated correctly during connection testing.

  • LDAP Search Filter with Ampersand (&) Character Fails

    Resolved an issue where LDAP user search failed when the filter contained an ampersand (&). The query processor was incorrectly encoding it as &. The filter is now processed with the correct character encoding.

  • SSO Users with Special Characters in Names Cannot Be Deleted

    Resolved an issue where users onboarded through SSO with special characters such as !, ^, %, and , in their names could not be deleted from the user inventory. The deletion operation now handles such names without validation errors.

  • SIEM Log Fragmentation Due to Extra Newline Character

    Resolved an issue where AppViewX SIEM integration logs appeared fragmented in external SIEM platforms such as Google Chronicle. The root cause was an extra newline character in log entries at the source. Log entries are now correctly formatted, preventing fragmentation during ingestion.

  • SCIM User Synchronization Fails After SCIM Token Regeneration

    Resolved an issue where SCIM-based user provisioning from Microsoft Entra ID failed after the SCIM token was regenerated and updated. User update operations returned "User does not exist" despite users being present in the AppViewX inventory. SCIM provisioning now functions correctly following token regeneration.

  • RBAC Resource Search Returns Error

    Resolved an issue where searching for resources in the RBAC configuration page returned an error and produced no results. RBAC resource search now functions correctly.

  • AD User Sync Fails with Out-of-Memory Error During Group-Based Status Count Update

    Resolved an issue where the AD User Sync job (Perform Platform Validation) failed with an Internal Server Error during the Get User Group Mapped Roles and Resources hook execution, caused by an out-of-memory condition triggered by the Group Based Status Count Update job. The job has been optimized to prevent memory exhaustion during AD sync validation.

  • Typo in Certificate Expiry Notification Email Template

    Resolved a typographical error in the Certificate Expiry Notification email template where the column header was displayed as "Certifcate UUID" instead of "Certificate UUID."

QTH

  • Tenable SC Scan Does Not Retrieve All Associated IP Addresses

    Resolved an issue where Tenable Security Center scans returned a significantly lower number of discovered assets than expected in large environments. Asset discovery now consistently retrieves the full set of assets from Tenable SC scans.

  • Tenable Scan Self-Signed Certificates Incorrectly Mapped to Wrong CAs

    Resolved an issue where self-signed certificates discovered through Tenable integration were incorrectly mapped to unrelated CA entries that had no configuration in AppViewX. Self-signed certificates are now correctly identified and their CA mapping is based on accurate certificate chain analysis.

SSH

  • SSH Provisioning API Fails for Large Host Sets

    Fixed an issue where the provisioning API would fail when a single request included a large number of servers. The API now supports batch processing of up to 500 hosts per request.

Sign

  • Code Signing Fails with Private Key Handle Not Found in HSM

    Resolved an issue where code signing operations failed with "Private key handle not found in HSM" (AVX_HSM_057) after the service account client secret was regenerated. The HSM session now correctly retrieves the private key handle following credential updates, without requiring pod restarts.

  • Code Signing Certificate Update Blocked by Mandatory CSR Fields on Imported Certificates

    Resolved an issue where updating generic information fields for imported code signing certificates was blocked because fields configured as mandatory during CSR generation were enforced on imported certificates. Mandatory CSR field checks are no longer applied when updating certificates that were imported rather than created through CSR generation.